Brand Name: None
Power Source: DC
Controled Method: WIFI
Model Number: H801
Remote Distance: 5-10M
Item Type: RGB Controler
Warranty: 1 Year
Oscillation frequency: IEEE 802.11 b/g
Connection Mode: WIFI
Max. Load Power: 96
Output Load: RGB PWM Signal
Input Voltage: DC5V-24V
Module Transmission Speed: sends: 4Mbps and receives: 2.9Mbps
Diameter: LxWxH: 72mm x 45mm x 20mm
Support: 802.11 b/g/n
DC5-24V H801 LED Wifi Controller for RGB/RGBW LED Strip Light
(1). Connect and control RGB lamps easily by 'LED Dimmer'.
(2). Output RGBW, 4 routes PWM data, each route max 4A.
(3). Refresh frequency is 500HZ.
(4). Support 802.11 b/g/n.
(5). Fast transmission, response sensitive, sends rate: 4Mbps and receives rate: 2.9Mbps
(6). Multiple phones can control H801WiFi simultaneously.
(7). Built-in dozens of effects.
Or, directly scan the QR code below to download and install the APK to you Android devices:
1: Main Material: Plastic
2: Power Supply: DC
3: Connecting Model: WLAN
4: Oscillation Frequency: 500Hz
5: Controlled Method: WIFI Control, Android Smart Phone
6: Input Voltage: DC 5V~24V
7: Load Power: 96W
8: Channel Power: 0.5W
9: Frequency: 500Hz
10: Remote Distance (approx.): 10m
11: Output: 5 routes PWM, each route 4A
12: Dimension (approx.): LxWxH: 72mm x 45mm x 20mm
Package included: 1 x RGBW H801 Wifi Controller with manuel
How to Connect Smart Phone to this H801WIFI Controller
Step 1: Power on H801WiFi, install 'LED Dimmer' and create shortcut.
Duplicate LEDDimmer.apk to phone and click to install, long press the icon and drag it to home screen.
Step 2:Turn on WiFi
Power on H801WiFi, click phone pull-down menu, click settings, turn on WLAN, then choose and click 'HCX_******', password is '88888888', enter password and click connect.
The pop-up icon indicates WiFi is connected.
Step 3: Run LED Dimmer
Click LED Dimmer, pops up the following operation interface,slide on color wheel, the light be changed with the color accordingly. Click the button in the middle, the lights will be off.
Click the effect selection dialog, there are many effects for choosing.
Click menu-Color Rod to set the brightness of each color and playing speed.
Step 4:Connect to the router
If you require your phone to control the lights and surf the internet at the same time, you must connect H801WIFI to the router. Please follow the procedures:
(1). Install LEDDimmer.apk, and turn on WIFI.
(2). Click on menu-- 'Router', click 'WLAN AP', choose the right router, and enter password, then click 'link'. All H801WIFI that can communicate with the phone has been connected to the outer. Connect your phone to router too, after connection, your phone can both surf the internet and control H801WIFI.